Right Side Handlebar Throttle Switch Assembly - Compatible with Kawasaki KH250 KH400 Mach I Mach II S1 S2 S3

Reproduction throttle switch assembly for the Kawasaki KH250/400 and Mach I/II 250-400cc models. It's common for the stock switches to wear and corrode from decades of use. Sometimes the stock wires become brittle and break easily, so pick up a new switch and get back on the road!If you are running aftermarket handlebars check to make sure the 24" wire harness is long enough. This switch is designed to have the wires run outside the handlebars.Wire harness overall length = 24"Wire colors: 1 plastic terminal connector, blue/white line, black/yellow line, black/white line, brown, 1 female bullet terminal brown/white lineReplaces Kawasaki Part Numbers: 46132-025, 46132-007Note: Some models used different turn signals during their production, check photo and wiring info above. H1 / H2 and KH500 models may also be able to use this switch, modification may be required.Fits Kawasaki:KH250 - 1975-1977Mach I - S1 - 1972-1975Mach II - S2 - 1972-1973KH400 A3/A4/A5 - 1975-1978Mach II - S3 - 1974-1975

• Reproduction throttle switch assembly for the Kawasaki KH250/400 and Mach I/II 250-400cc models.
• Wire harness overall length = 24"
• Wire colors: 1 plastic terminal connector, blue/white line, black/yellow line, black/white line, brown, 1 female bullet terminal brown/white line
• Replaces Kawasaki Part Numbers: 46132-025, 46132-007
• Fits Kawasaki: KH250 - 1976-1977 | KH400 - 1976-1978 | S1 Mach I - 1973-1975 | S2 Mach II - 1972-1973 | S3 Mach II - 1974-1975